EPTZ_db_en_rev EPTZ – 1/4″ day / night outdoor. Speed dome camera Built-in protocols: Pelco-P / Pelco-D / EverFocus /. ED / ED View and Download EverFocus Eptz user manual online. EverFocus Speed Dome User Manual. Eptz Security Camera pdf manual download. EverFocus EPTZ Manual Online: Eptz/eptzi Overview, Introduction. EPTZ/EPTZI, An Intelligent High-speed Dome Camera Is Ready To.
|Published (Last):||3 April 2015|
|PDF File Size:||8.38 Mb|
|ePub File Size:||14.17 Mb|
|Price:||Free* [*Free Regsitration Required]|
Turn on the power, and start to operate the EPTZ The dipswitch setting and the indicated address are represented in the following chart. The length of the screws depends on the surface material. The EPTZ will not work eveefocus the polarity of control line is mis-connected. Auto focus is enabled. However, there is only one line on the line display, so using some combination keys to operate is necessary.
Equipped with an industrial grade mechanized head, this camera offers a wide range of evegfocus PTZ operations including a powerful 18x optical zoom, degrees of continuous pan and preset positions. After finishing self-inspection, you can start to operate the EPTZ The mentioned screws are used in the normal concrete surface.
Align the two screw holes on the bottom of mechanical part to the two bolts on the base of the housing, and twist the mechanical part clockwise a little bit in order to engage it with the base. Please be careful when installing this part.
Middle wide dynamic range. AGC setting will affect the wide dynamic range, or other image performance. Auto Pan Mode Two point auto pan: Pole Mount Adapter The pole adapter is used for installing a wall mount bracket to a pole indoors or outdoors. It is located on the PCB board of the housing. There is a tour with 3 preset positions 1, 2 and 3. Alternatively, you could run the tour without entering MENU. The camera can be installed indoors or outdoors, with its built-in heater and fan keeping 0300 temperatures everfocue optimum levels.
Screw the two bolts on the base, and then connect and fix the connection bus to the PCB board on everdocus mechanical part. Packing List There are 3 boxes that are housing, bulb and mechanical part with a camera In order evervocus enhance the view in the low lux environment, slow shutter allows more light go through the shutter.
Enable a digital zoom. Built-in 4 alarm inputs and 1 alarm output. In order to protect the bulb from dirt and scrape, please put on the gloves before installing the bulb.
Enter the alarm number, and then press Enter.
Everfocus EPTZ Dome camera Specifications | Everfocus Dome camera –
Don’t have an account? AB two point pan if limit is ON. The two switches are used to set address, protocol, Baud Rate, video format and terminal resistance. An extension power line may be needed. Installation location that is a wall, a pole or a ceiling needs to support above five times the total weight of the camera assembly about 16 kg to avoid shaken images, and dropping.
Pan setting dwell time Private zone protects your privacy. Enter text from picture: Rack and Speed Dome Installation 2. RS Bus Terminal Resistance Got it, continue to print.
Disable the private zone masking. See any errors on this page? White balance control mode. A suitable wire that has etpz signal decline can be used as an alarm cable. Packing List There are 3 boxes that are housing, bulb and mechanical part with a camera module, one wall mount bracket, one power adapter and one tool packet in the package. The input AC voltage everdocus of an adapter depends on different area.
EverFocus Eptz User manual |
Feb15, Table of Contents 1. An amplifier may be needed if the video cable is too long.
Enable a normal open alarm input. Disable the title display. Be the first to review this item. Fix the housing on the wall mount bracket, and screw in 3 M5 bolts Hex on the top of the bracket with the attached Hex Allen wrench to fix the housing.
EverFocus Eptz3000 User Manual
The control-related setting that is address, communication protocol and transmission speed have to be set consistently with the control device such as a keyboard or a DVR. Auto iris is enabled. You can set the masking size and position in the private zone setup mode. JP1 and JP3 are connectors for heater, and they can be switched. The difference between the One-way tour mode and To-and-fro tour mode is that the return modes are different.
Set the parameter of a preset position: